Phillips 66 Victory Aviation Oil 100AW SAE 50

Phillips 66 Victory Aviation Oil 100AW SAE 50 — available as a single quart or a case of 12 quarts.

Part Numbers: 08-13850-1 (Single Quart), 08-13850 (Case of 12 Quarts). MFR model #: 1059152.

Overview

Phillips 66 Victory Aviation Oil 100AW is an ashless dispersant, single-grade engine oil pre-blended with the proper concentration of antiscuff/antiwear additive (LW-16702) as mandated by Lycoming Service Bulletins 446E and 471B and Service Instruction 1409C. It is recommended for use in opposed piston and radial piston aircraft engines where cam lifter wear is a concern.

The ashless dispersant formulation helps minimize the formation of engine sludge, varnish, piston deposits and combustion chamber deposits, resulting in a much cleaner engine compared with the use of straight (nondispersant) mineral oils. This oil has a high viscosity index and low pour point compared with many other single-grade aircraft engine oils, allowing its use over a wide temperature range.

Victory Aviation Oil 100AW is FAA approved as an alternate method of compliance to AD80-04-03 R2, paragraph b.1.

Features

• Ashless dispersant helps minimize engine sludge and varnish deposits for a cleaner engine.
• Pre-blended with Lycoming-approved antiwear additive.
• High film strength for protection against wear and piston scuffing.
• High viscosity index and low pour point for use over a wide temperature range.
• Protects against rust and corrosion.
• Formulated with the same high-quality base oils used in Phillips 66 X/C Aviation Oil.

Specifications

• Avco Lycoming Material Specification No. 301G
• Pratt & Whitney Service Bulletin No. 1183 Rev. U
• SAE Standard J1899
• Teledyne Continental Material Specification MHS-24B
• U.S. Military Specification MIL-L-22851D (obsolete) for additive treatment

Applications

Opposed piston aircraft engines, especially where cam lifter wear is a concern.

Documents

Phillips 66 Victory Aviation 100AW Data Sheet